Ltd Series Turbine Flowmeter for Water Injection

Ltd Series Turbine Flowmeter for Water Injection

LXSC-G2 is a turbine super dry water meter for residential application in sizes 15mm, 20mm and 25mm for cold and hot potable water and meets the international standard ISO4064 Class B or Class C. Features * All the materials in contact with water are meeting potable water standard. * Body...
Send Inquiry
Description

Our corporation successfully attained IS9001 Certification and European CE Certification of Hot Type Intelligent Water Meter, Single-jet Cold Water Meter, individual water meters for units. You'll get our professional reply within 8 hours. We recognize that talent is our most valuable resource, thus we strive to attract, cultivate and retain the best talent. The great cooperation could boost each of us into better development! We are committed to building a corporate talent team, and improving culture while achieving customer goals.


Economic Copper Can Multi-Jet Turbine Water Meter 

Class C/ R160 (Dry Type )


IMG_9706.CR2

Product Introduction:

LXSC-G2 (Dn15 mm) is an economic turbine water meter for residential application for cold and hot potable water and meets the international standard ISO4064 Class B or Class C. It is with copper-can register, which can rotate for 360 degree and IP68 for a long-term clear reading.

 

 

Features:

* Body material is brass or plastic (reinforced polymerization), corrosion resistance.

* Magnetic drive and magnetic shield.

* Copper can register, IP68 protection from the environment, ensures clear reading, frost resistance and freezing resistance. 

* Inlet strainer.

* Non return valve to avoid the reserve flow rate (optional);

* Pre-equipped pulse output.

* Complete solid lockable plastic shell for long lifetime to stop tampering.

*The register can be 7 rollers and 2 pointers or 6 rollers and 2 pointers.


Dial Plate Design:

12 小dial plate

1


turbine water meter


Main Technical Data According to ISO4064 :1993 (Old Standard)

turbine water meter (2)


Main Technical Data According to ISO4064:2014 (New Standard)

turbine water meter (2)


Maximum Permissible Error:

In the lower zone from Qmin(Q1) inclusive up to but excluding Qt (Q2) is ±5%. 

In the upper zone from Qt(Q2) inclusive up to and including Qmax(Q4) is ±2%(cold water meter).

In the upper zone from Qt(Q2) inclusive up to and including Qmax(Q4) is ±3%(hot water meter).

误差曲线图头损曲线图


Installation requirements: 

* The meter should be installed in horizontal position with the direction of the flow as indicated by the arrow cast in the meter body with the register face upwards. 

* Pipeline must be flushed before installation. 

* The meter should be constantly full of water during operation. 

* We suggest the installation of the water meter as:

安装示意图

FAQ

Q1. What is our warranty?

A: 5 Years warranty. If there is any quality problem on our water meters, we would take the full responsibility.

 

Q2. Why choose JIANGBEI water meter?

A: We test the flow rate, demagnetize test, anti-magnetism test, pressure loss, maximum pressure test, endurance test, strictly according to ISO 4064 and EN 14154 standard. Also, we have CNAS certified water meter laboratory to make sure that our water meters can fully meet different clients requirements.

 

 

Q3. What is your terms of packing?

 

A: Generally, we pack water meters in strong carton, wooden pallet or wooden case. And we also can put your brand or LOGO on packaging after getting your authorization letters.

 

 

 

Q4. What is your terms of payment?

 

A: T/T 30% as deposit, and 70% before delivery or 70% against copy of bill of lading. We'll show you the photos of your water meters and packages before you pay the balance.

 

 

 

Q5. What is your terms of delivery?

 

A: EXW, FOB, CFR, CIF, DDU.

 

 

 

Q6. How about your delivery time?

 

A: Generally, it will take about 10-15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order on water meters.

 

 

 

Q7. Can you produce according to the water meter samples?

 

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

 

 

Q8. Do you test all your water meters before delivery?

 

A: Yes, we have 100% test before delivery.

 

 

 

Q9. How do you make our business long-term and good relationship?

 

A:1. We keep good quality and competitive price on our water meters to ensure our customers benefit. 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.



The research and development of a batch of high-tech Ltd Series Turbine Flowmeter for Water Injection has cultivated our company's new economic growth point. Throughout the expansion, we have remained focused on our core philosophy that creativity and quality design together with a rapid response to market demands will yield profitable results. We build a responsible after-sales system, with sufficient stock, a wide variety of products, and high cost-effectiveness.

Hot Tags: Class C Economic Water Meter, China, Manufacturers, Suppliers, Factory, Liquid Type Water Meter, Digital Water Meter, Plastic Volumetric Water Meter, water flow meter gauge, RF Card Prepayment Water Meter, water meter usage

Send Inquiry